Crispy Battered Fish and Chips Recipe (2024)

Fish and chips are popular pub fare all around Britain, though I had some of the best in a small seaside town called Hastings, England that my family visited years ago. The crispy golden fried pieces were made using freshly caught fish and were served wrapped in newspaper with thick-cut French fries.

This version of fish and chips is inspired by Dame NYC, an English seafood restaurant in the West Village. Their version of the classic (actually inspired by Heston Blumenthal’s version of fish and chips) has an extra crispy exterior since it’s fried with a combination of all-purpose flour, rice flour, beer and a bit of vodka.

Because both the fish and fries are best fresh and require lots of frying room, I recommend cooking the fries first then reheating them in the broiler or in the air fryer while the fish fries. The batter should be freshly made so it’s frothy and bubbly, I don’t recommend letting it sit ahead of time. It’s also crucial the oil is heated to the proper temperature to get the proper crunch. An infrared thermometer is a great buy to ensure the correct temperature.

Crispy Battered Fish and Chips Recipe

Table of contents

  • Crispy Battered Fish and Chips Recipe
    • Key Ingredients in This Recipe
    • How to Make Fish and Chips
    • Tips and Tricks for This Recipe
    • Other Recipes To Try
Crispy Battered Fish and Chips Recipe (1)

Key Ingredients in This Recipe

  • Fish – A flakey, lean white fish like cod, haddock, halibut or hake has the best texture and flavor for fish and chips. I recommend buying a local fish for the freshest tasting flavor.
  • All purpose flour – This is the most commonly used in beer-batter, using all-purpose flour alone won’t get and stay as crispy as using it in combination with another flour.
  • Rice flour – Which I use in one of my favorite fried recipes, buffalo cauliflower, has a lower moisture content and is also naturally gluten free (however I use it in addition to wheat flour in this recipe).
  • Turmeric – My brother showed me this trick years ago. Adding a bit of turmeric powder adds a beautiful golden color to the batter for perfectly golden looking fried fish in this dish.
  • Vodka – Adding a bit of vodka is the key to a crunchy exterior. Vodka evaporates more quickly than water which makes the crust perfectly crispy.
  • Beer – A simple light beer or lager (it can be cheap) is best for beer batter. You don’t want to use a beer with a flavor that is too overpowering.
  • Potatoes – In this recipe I use Russet potatoes, also known as Idaho potatoes to make the fries served alongside the beer-battered fish. They’re large, starchy, oblong potatoes known for being the ideal baking potato. When cooked they become soft and light on the inside while frying them leaves them extra crispy on the outside.

How to Make Fish and Chips

Crispy Battered Fish and Chips Recipe (2)
Step 1: Prep potatoes.

Slice the peeled potatoes into ½” (1.3cm) thick planks and cut each plank into ½” (1.3cm) fries. Add the cut fries to a large bowl filled with cold water and the vinegar and let sit for 30 minutes.

Step 2: Fry the fries once.

In a heavy-bottomed pot or Dutch oven add enough oil to reach 2” (5cm) up the pan. Heat the oil to 250ºF (130ºC). While the oil heats, drain the fries and pat completely dry. Working in batches, add a handful of the fries to the oil and fry, stirring occasionally, until cooked through, about 5 minutes.

Crispy Battered Fish and Chips Recipe (3)
Crispy Battered Fish and Chips Recipe (4)
Step 3: Increase oil temperature.

Increase the heat. Use tongs to remove the potatoes to a paper towel-lined baking sheet. Repeat with the remaining fries. Let all the fries cool to room temperature then increase the temperature of the oil to 350ºF (180ºC).

Step 4: Fry fries a second time.

Fry for a second time and season. Working in batches again, add fries to the oil and fry until golden brown and crispy, about 3 minutes. Remove to a paper towel-lined baking sheet once more to drain and season with salt.

Crispy Battered Fish and Chips Recipe (5)
Crispy Battered Fish and Chips Recipe (6)
Step 5: Prep the fish.

Cut the fish into filets. Pat dry with paper towels to remove any excess moisture. Season with salt and pepper and set aside.

Step 6: Make beer batter.

Return the oil to heat, adding additional oil to the pan if needed. Heat the oil to 400ºF (200ºC). In a large mixing bowl, whisk together the all-purpose flour, rice flour, baking powder and turmeric. Stir in the vodka followed by the lager into the flour mixture until just combined.

Crispy Battered Fish and Chips Recipe (7)
Crispy Battered Fish and Chips Recipe (8)
Step 7: Coat fish in batter.

Working a few pieces of fish at a time, dip the fish fillets in the batter and turn to coat completely. Remove the fish from the batter one piece at a time, making sure any excess batter drips off.

Step 8: Fry fish.

Add to the hot oil and fry, turning once, until crispy, golden brown and just cooked through, about 3 minutes total. Remove from the oil and let drain on a wire rack set over a paper-towel lined baking sheet. Repeat with the remaining fish.

Crispy Battered Fish and Chips Recipe (9)
Crispy Battered Fish and Chips Recipe (10)
Step 9: Serve.

Divide the fish and fries among serving plates. Serve with a lemon wedges, tartar sauce and malt vinegar.

Tips and Tricks for This Recipe

Swaps and substitutions
  • Try using store bought fries! Rather than making your own fries for the fish and chips, a great shortcut is using store bought, frozen French fries to cut down on the work and frying. Cook them in the oven or use an air fryer for extra crispy fries.
  • Try frying other types of fish using this batter! I actually really enjoy battered, fried salmon.
Troubleshooting Fried Fish
  • My fish isn’t browning. The temperature of the oil you are using to fry the fish isn’t hot enough. Make sure it’s heated thoroughly before adding the fish. Check it by using a thermometer or adding a small amount of batter to the oil, there should be lots of small bubbles. After cooking each batch, give the oil a few minutes to come back to temperature before adding more.
  • My fish isn’t cooked inside but the outside is dark. Your oil is too hot! The batter is browning too fast and the fish doesn’t have enough time to cook while the exterior is browning too fast. The best solution for this is to make sure you have a thermometer on hand.
What to Serve with Fish and Chips
  • Tartar sauce
  • Malt vinegar
  • Lemon wedge
Crispy Battered Fish and Chips Recipe (11)

Other Recipes To Try

If you enjoy this fish and chips recipe, give these recipes a try:

  • Beer Battered Baja Fish Tacos
  • Thai Fried Red Snapper
  • Pan-Seared White Fish

Crispy Battered Fish and Chips Recipe

Crispy Battered Fish and Chips Recipe (12)

PrintPin

Prep Time 30 minutes mins

Cook Time 30 minutes mins

Serves 4

US CustomaryMetric

Ingredients:

For the fries:

  • 4 large Russet potatoes (about 2½ pounds, scrubbed and peeled)
  • ¼ cup white vinegar
  • Vegetable oil, as needed, for frying
  • Kosher salt, as needed

For the battered fish:

  • pound cod or other flakey white fish
  • Kosher salt, as needed
  • Freshly ground black pepper, as needed
  • Vegetable oil, as needed, for frying
  • 1 cup all-purpose flour
  • 1 cup white rice flour
  • 2 teaspoons baking powder
  • ½ teaspoon turmeric
  • ½ cup vodka
  • cup chilled lager beer

For serving:

  • Sliced lemon, for garnish
  • Malt vinegar, as needed
  • Tartar sauce, as needed

Instructions:

For the fries:

  • Slice the peeled potatoes into ½” (1.3cm) thick planks and cut each plank into ½” (1.3cm) fries. Add the cut fries to a large bowl filled with cold water and the vinegar and let sit for 30 minutes.

  • In a heavy-bottomed pot add enough oil to reach 2” (5cm) up the pan. Heat the oil to 250ºF (130ºC). While the oil heats, drain the fries and pat completely dry. Working in batches, add a handful of the fries to the oil and fry, stirring occasionally, until cooked through, about 5 minutes.

  • Increase the heat. Use tongs to remove the potatoes to a paper towel-lined baking sheet. Repeat with the remaining fries. Let all the fries cool to room temperature then increase the temperature of the oil to 350ºF (180ºC).

  • Fry for a second time and season. Working in batches again, add fries to the oil and fry until golden brown and crispy, about 3 minutes. Remove to a paper towel-lined baking sheet once more to drain and season with salt.

For the battered fish:

  • Cut the fish into filets. Pat dry with paper towels to remove any excess moisture. Season with salt and pepper and set aside.

  • Return the oil to heat, adding additional oil to the pan if needed. Heat the oil to 400ºF (200ºC).

  • In a large mixing bowl, whisk together the all-purpose flour, rice flour, baking powder and turmeric. Stir in the vodka followed by the lager until just combined.

  • Working a few pieces of fish at a time, add to the batter and turn to coat completely. Remove the fish from the batter one piece at a time, making sure any excess batter drips off.

  • Add to the hot oil and fry, turning once, until crispy, golden brown and just cooked through, about 3 minutes total. Remove from the oil and let drain on a wire rack set over a paper-towel lined baking sheet. Repeat with the remaining fish.

For serving:

  • Divide the fish and fries among serving plates. Serve with a lemon wedge, tartar sauce and malt vinegar.

DID YOU MAKE THIS?

TAG ME ON INSTAGRAM TO BE FEATURED ON MY STORIES!@cookingwithco*cktailrings

Crispy Battered Fish and Chips Recipe (2024)

FAQs

What makes batter more crispy? ›

Rice flour and cornstarch work particularly well because they fry up crispier than wheat flour. They also absorb less moisture and fat during the frying process, making the products less greasy. This is why rice flour is often used when making tempura because it produces a very thin and crispy, dry crust.

How do you keep fish batter crispy? ›

Rice flour for a stay-crispy batter. Just using normal flour doesn't cut it – it goes soggy within minutes. We need to use a combination of rice and normal flour. This is a proven technique deployed in many Asian fried recipes, such as Honey Chicken and Sweet & Sour Pork.

How do you make batter stick to fish? ›

Milk: The proteins in milk help the batter adhere to the fish and promote browning. Water: Use very cold water for the crispiest results. Baking powder: Baking powder ensures a light and crispy exterior. Salt: A teaspoon of salt enhances the overall flavor of the fish batter.

Why is my fish and chips not crispy? ›

Temperature is the key to crispy fish and chips

To ensure the correct temp, keep a deep-frying thermometer on hand, eliminating guesswork. Also, avoid overcrowding your pan; doing so can cause your oil's temperature to drop, leading again to uneven cooking and oil-logged sogginess.

Is baking soda or powder better for crispy batter? ›

Baking powder is better for recipes that contain little or no acid ingredients. Baking soda helps make fried foods crispy and light. It is also useful for cleaning and removing stains.

What is the best oil for crispy batter? ›

Vegetable Oil: Best All-Purpose Oil for Frying

It's great for all different methods of frying and all kinds of foods like breaded chicken and fries. Typically a blend of oils, it has a high smoke point of 400 to 450 degrees, and it has a pretty neutral flavor, which deepens the flavor of the food.

What oil makes fish crispy? ›

Thanks to its neutral flavor, affordable price, and high smoke point, canola oil is the most popular oil for frying fish. Peanut, cottonseed, and coconut oil are also great fish frying oils.

Which flour is best for crispy fish? ›

Fish fillets dusted with flour and cooked until crispy makes a simple yet satisfying dish. The flour browns nicely and creates just the barest hint of a crust on the fish. For this technique, all-purpose flour is often used, and this is a great way to start.

How does Gordon Ramsay make batter for fish? ›

Cooking instructions
  1. In a large bowl, mix both flours, baking powder and sugar.
  2. Add soda water, lager and salt.
  3. Mix together only until the batter binds together and is smooth. ...
  4. Cover your fish with a dusting of plain flour, then drop into the batter and coat completely.
  5. Pre-heat vegetable oil in deep fryer to 180C.

Should I coat fish in flour before batter? ›

Don't skip the flour coating since it provides a delicious crispy texture, protects the fish from soaking up too much oil, and also keeps the fillet in one piece. For best results, use a heavy-bottomed pan, as it distributes the heat evenly.

Do you put egg in batter? ›

Batters are made by combining some sort of flour—usually wheat flour, though cornstarch and rice flour are not uncommon—with a liquid and optional leavening or binding ingredients, like eggs and baking powder.

What is the best oil for fish and chips? ›

You want your fish to taste great with classic tartar sauce and sides for fried fish! So it's best to use a neutral oil, like canola, vegetable and safflower oil to fry fish. Peanut oil has a high smoke point, which is perfect for frying, but it could add a slightly nutty flavor to your fish.

Why are my homemade chips not crispy? ›

Why are my homemade chips not crispy? It's likely that too many chips were cooked at once (a crowded pan is never a good thing) and doing so means the temperature of the oil decreases, resulting in soggy, greasy chips.

Why does batter fall off fish when frying? ›

Lastly but not the least important is to dip the batter coated fish in the fryer. The right temp is a must. The range def has to be between 350-375. Lower then that and the batter will disperse, and higher then that the batter might stick but it will look like toast rather then fish.

What makes fried food more crispy? ›

Oil conducts heat at a much higher temperature than water. So when hot oil makes contact with to-be-cooked food (which has moisture), it causes the water on the surface of the food to rapidly evaporate leading to a crispy surface.

Does baking powder make batter crispier? ›

INGREDIENTS TIPS

When mixed with the flour, the cornstarch makes the flour coating crispier and gives it that golden brown color! (It has to do with prevention of gluten development.) The baking powder reacts with the oil and creates tiny air bubbles, which also helps form a crispy coating.

Why is my batter not going crispy? ›

  1. Oil has to be high, as in 350-400.
  2. Flour type matters but I've always had the roomie buy it, run of the mill every day flour doesn't cut it.
  3. Crispy stuff has to be DRY before frying. ...
  4. Over will help dry it and crisp it due to the heat, also can add a bit of that darkened look to food that I like.
Nov 28, 2015

References

Top Articles
Latest Posts
Article information

Author: Rev. Leonie Wyman

Last Updated:

Views: 5456

Rating: 4.9 / 5 (59 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Rev. Leonie Wyman

Birthday: 1993-07-01

Address: Suite 763 6272 Lang Bypass, New Xochitlport, VT 72704-3308

Phone: +22014484519944

Job: Banking Officer

Hobby: Sailing, Gaming, Basketball, Calligraphy, Mycology, Astronomy, Juggling

Introduction: My name is Rev. Leonie Wyman, I am a colorful, tasty, splendid, fair, witty, gorgeous, splendid person who loves writing and wants to share my knowledge and understanding with you.